Stone Slab Cutting And Edge Profile Services
Every slab that leaves our Foshan base is cut, edged and checked before it is crated. The cutting line covers worktops, vanity tops and wall panels in marble, granite, quartz and sintered stone — cut to your template, install-ready, with polished, eased, bullnose or flap edges finished before packing. Cut-to-size typically adds 15–25 days on top of slab preparation, because each piece is cut, edged and checked individually.
What Is the Slab Cutting Service?
The cutting line serves all four stone families on the same process: template in, install-ready pieces out. A template from the site or from the fitted cabinets both work.
Technical Specifications
The standard specification behind every stone program we produce. Every value can be changed per project — send your drawing and we confirm the final spec before production.
Full specification
- Materials
- Marble, granite, quartz and sintered stone
- Slab thickness
- 20–30 mm depending on application
- Edges
- Polished, eased, bullnose or flap, to your drawing
- Cut-to-size
- Worktops, vanity tops and wall panels install-ready
- Slab selection
- Photo and video of each slab before you confirm
- Packing
- Steel-frame or heavy wooden crates with foam corner protection
- Insurance
- Cargo insurance available on every stone order
- Lead time
- Cut-to-size worktops typically add 15–25 days
Stone Families on the Cutting Line
The cutting line runs all four families: marble in 20–30 mm worktops and 3 mm, 6 mm and 12 mm slabs; granite and quartz on the same 20–30 mm line; sintered stone in the 1200×2400 slab and the 6 mm panel.
The edge profiles and finishes are the same across the families. Most requested cutting programs:
Cutting Line Examples
Cut pieces from the line — each checked against the drawing before it is crated:
How the Cutting Line Works
Six decisions shape the cut list, and each is confirmed before the first cut:
Template first
The cut list runs from your template or drawing — site measurements or the fitted cabinets both work. The sink and hob apertures are marked on the drawing, not chased on site.
Edge profile per piece
Polished, eased, bullnose or flap, stated per piece on the cut list. The edge is finished before packing, because an edge profile cannot be changed once the stone is installed.
Finish per face
Polished, honed, leathered or matt by family and application. The finish is applied before the edge work, so the profile carries the same face.
Check before crate
Each cut piece is checked against the drawing before it is crated — dimensions, aperture positions and edge profile. A piece that fails the check is re-cut, not shipped.
Packing
Cut pieces ship in steel-frame or heavy wooden crates with foam corner protection, each piece numbered to the cut list, so the site team installs by number.
Timing
Cut-to-size typically adds 15–25 days on top of slab preparation, because each piece is cut, edged and checked individually. The confirmed cut list starts that clock.
What you send
The template or drawing, the stone family, the finish and the edge profile per piece. We return the cut list for approval before production.
Cutting Profiles Compared
The edge profiles we cut, compared on the applications each one earns.
| Polished | Eased | Bullnose | Flap | |
|---|---|---|---|---|
| Face | Mirror finish | Soft chamfer | Rounded nose | Folded flap |
| Feel | Sharp, formal | Soft, no lip | Rolled, safe | Layered, modern |
| Typical use | Statement island | Everyday worktop | Counter with kids | Island edge, bar |
| After install | Cannot change — cut to drawing | Cannot change — cut to drawing | Cannot change — cut to drawing | Cannot change — cut to drawing |
How Ordering Works
The same four-step process we use for every villa stone package — from slab selection to your loading port:
Step 1: Share Your Template and Drawing
Send the template or drawing, the stone family and the edge profile per piece by email or WhatsApp.
Step 2: Approve the Cut List
We return the cut list with dimensions, apertures and edge profiles for your approval.
Step 3: Confirm the Slab by Photo
We send the slab photo and video for your confirmation before any cutting starts.
Step 4: Cut, Check and Ship
We cut to size, edge-finish, check each piece and crate-pack with cargo insurance to your port.
Ordering & Delivery Specs
Factory-direct from Foshan, China — the same published numbers on every product page, for easy comparison.
| Order / MOQ | No rigid minimum — orders start from a single room; whole-house consolidation available |
|---|---|
| Factory price | Factory-direct pricing, up to ~30% below retail; interior design fee $5–12/㎡ by area (tiers on the pricing page) |
| Production lead time | 45–50 days standard, varies with project scale and material selection |
| Shipping | FOB / CIF / DDP door-to-door · FCL container consolidation · room-by-room labeling & export packing |
| Origin | Foshan, Guangdong, China — 20 years of export experience |
| Certifications | ISO 9001 · ISO 14001 · CE · SGS · SASO · Intertek |
| Warranty | 2–5 years depending on category |
| Pre-shipment QC | Quality inspection report + container loading photos with every shipment |
Frequently Asked Questions
What can the cutting line cut?
Worktops, vanity tops and wall panels in marble, granite, quartz and sintered stone — cut to your template, install-ready, on the 20–30 mm worktop line and the 3 mm, 6 mm and 12 mm slabs.
Which edge profiles do you cut?
Polished, eased, bullnose or flap, stated per piece on the cut list. The profile is finished before packing, because it cannot be changed once the stone is installed.
How long does cut-to-size take?
Typically 15–25 days on top of slab preparation, because each piece is cut, edged and checked individually.
Do I need a template?
A template from the site or the fitted cabinets both work. Without one, the drawing dimensions are the cut basis, and the apertures are marked on the drawing.
How are cut pieces packed?
In steel-frame or heavy wooden crates with foam corner protection, each piece numbered to the cut list. Cargo insurance is available on every stone order.
Can sink and hob cut-outs be done?
Yes. The apertures are cut to the drawing and marked on it — the worktop arrives install-ready, no on-site chasing.
Send Your Template for a Cutting Quote
Template or drawing, stone family and edge profile — we return the cut list and a quotation within 24 hours.
Send Your Stone PlanView How It WorksMarble & Stone Overview
Maintained by the George Villa design team — ISO 9001-certified villa interior factory, Foshan, China. Updated September 2026. See how it was delivered — 347 delivered villa projects — or how your order ships door to door.